How to identify the quality and safety of ergonomic chair for office?

Jul 23 2020



1. Whether a formal inspection report is issued

According to industry insiders, all the chair lifts sold by regular ergonomic chair for office manufacturers will generally issue an inspection report. For pneumatic rods with a certain risk factor, steel materials and high purity gases are generally required. For manufacturing, it is necessary to strictly seal the gas; generally, the upper end of the pneumatic rod is usually printed with a verification mark made by the relevant department, and the manufacturer, the type of the pneumatic rod and the reminder are also written in English.

2. Check the load-bearing capacity of the backrest

The backrest of an ergonomic chair for office is generally something that we need to pay attention to. We can sit up and feel the load-bearing capacity and stability. If you sit on it and feel that it shakes badly and is about to fall at any time, then this chair must be of poor quality. In addition, look at whether the height of the armrests of the ergonomic chair for office are equal. Unequal armrests can bring discomfort to people.

3. Check the chassis and casters

Some businesses use bad materials to make chairs, which makes its stability quite unstable. Then adjust the lifting system or tilt adjustment of the ergonomic chair for office to see if it is smooth.

4. Check the small details of hardware accessories

The tightness of the hardware connection is generally the key to determining the stability of the ergonomic chair for office. If the hardware connection is not tight, loose, or has fewer screws, the ergonomic chair for office will be very shaken, even after a long time. It may collapse, and there are great safety risks.